The big question

[hg2]

  Bob there's one thing I do know for sure that you're one of the worlds greatest undiscovered philosophers.Your postings all come like a good shot of scotch,straight up with nothing but the true good essence,not needing anything to compliment it.And I guess you're right you have to trust some people or we may miss what we're seeking altogether.And in the case of your writings being so down to earth it would stand to reason that you're definitely the real McCoy.

     Thanks for the chat it was well worth all the typing.

                                                                              Rusty

[Bob]

Ahh now stop !, Your gunn'amake me Blush !  HAHAHAHA
Getting deep in here thats fer sure !
....
anyway I'll post a new thred on  the Useing Hydroxy generators when I get some info on making the O'l
Briggs and Stratton 3.5Hp working.... it should give us some reliable info if nothing else...
as well as the running  charastics, weather the carb is needed or not, that sort'a thing !
it will be interesting indeed !
...been thinking about it all morning... trying to figure out how to go about it....
think I'll use the smack booster and hit it with a bunch of amps HHAHAHHA ! see if thats enough Hydroxy gas.... , start the hydroxy gen and then give it a shot of quick start and give it a yank ...that should do the trick... ... I'll have to take off the carb because its part of the gastank on that thing I think....so I can just use a tube heheheheh
...
 I do know I can just put the hose in the intake port and tape it closed and it will run on that
but I'ed like it a bit more repeatable than that and tape will melt  ! HAHAHAHAHAHHA
...
what ever ...I'll work on it ! HA !
...
thanks fer the compliments but they are a bit exuberant on this o'l boy hahahahha !
...
Bob......

[Pilot Guy]

Hi guys,

For what it's worth....
I have filled a large ballon with around 12 liters of hydroxy gas and idled my 4 liter Ford Ranger engine with the fuel system turned off for 1 minute and 8 seconds. If you don't believe my results then either try it your self or send me a private email request and if you are in San Diego County I can meet up with you and personally show you how my truck can run on Hydroxy alone up to 1200 RPM.

The Pilot Guy

[candyman55]

Way to go pilot guy, I never had any doubt that it can work, If we can run engines on natural gas, and propane. I am sure we will sooner or later get em to run on HHO. BTW I do make it to San Diego once in a while. Next time I'll look you up. Good Job

[hg2]

Hi guys,

For what it's worth....
I have filled a large balloon with around 12 liters of hydroxy gas and idled my 4 liter Ford Ranger engine with the fuel system turned off for 1 minute and 8 seconds. If you don't believe my results then either try it your self or send me a private email request and if you are in San Diego County I can meet up with you and personally show you how my truck can run on Hydroxy alone up to 1200 RPM.

The Pilot Guy

   Pilot guy I'd like to try this and have a couple of questions for you before I do.First the balloon you used approx. how large a diameter do you think it was to hold 12 liters of hho.Also how did you introduce it to the motor?Did you just stretch the balloon over the intake and then start the motor?And when you said you shut the fuel off for the duration mentioned how was that done?

  Sorry for all the Q & A but this sounds very interesting and would answer questions I have regarding the amount of hho it takes to run a motor on just hho.


                     Thanks

                                           Rusty

[Bob]

HAY ! its Pilot Guy ! About time you found us buddy ! HAHAHAHAHA
welcome to the Hydroxy Hut !...you'll find no SPAM or Porno here !
...
You can post your Pics Here Pilot Guy ...and Please do !...
Now I want to do some calculations on your Balloon exp to see how close my estimates are on running my truck ! THANK YOU FOR THAT it will help allot !
...
Bob....

[Bob]

Ummm Man I dunno what I did to those figures but it can't be right....so I'll go about it another way......
...
I figured that Pilot guys balloon test  shows that it takes 12LPM to idle his 4Liter truck.
halfing that gets 6LPM for a 2liter truck. for idleing
half it again to get 3LPM for 1Liter displacement.... to idle...
...
so to idle my 2.5liter toyota it will take 2.5x3LPM=7.5LPM  to idle my pickup.
asumeing Pilot Guys Idle was set at 800rpm we can guesstimate Hydroxy gas useage not under a load....
...2x800=1600RPM...2x7.5=15LPM
...2x1600=3200rpm 2x15=30LPM...
which is about double my original estimates !
...but still obtainable!

 So useing Pilot Guys results it will take me 30LPM to drive my truck on 100% hydroxy gas!
... However I am sure that can be leaned out much more than that !
Hydrogen and Hydroxy gas both will still ignite even being so rich that it would flood a gasoline engine....but Hydrogen and Hydroxy gas just keeps on going.... so its possable that his mixture was 30 times richer than it needed to be to run the engine ...and indeed I expect that is the case unless he made up some valve to adjust the flow of the balloon into the engine and adjusted it as lean as it could possably go. which I doubt as it would have taken quite a few trial runs to accomplish that task
... How about it Pilot Guy... what did ya DO ?
thats very incurrageing info ya gave us !
THANK YOU !

Bob............